tftp `ethaddr' not set

坛友遇到个问题。怀疑是网卡参数没有设置完整。。。下面是问题log 进入新的UBOOT OX820 # setenv ipaddr 192.168.1.1OX820 # setenv serverip 192.168.1.100OX820 # tftpboot 0x62000000 openwrt-oxnas-pogoplug-pro-fit-uImage-initramfs.itbSpeed: 100, full duplex*** ERROR: `ethaddr' not set解决办法打ping命令时，输出“*** ...

阅读全文>>

pogo 烧网卡问题

用绝缘胶布屏蔽AR9380的3、5脚，已经解决烧卡的问题

阅读全文>>

pogo 源

#play4fun 3.13.7源 #src/gz pogoplug http://store.fishlee.net/router/ ... s_20140510/packages#小熊源 #src/gz barrier_breaker http://www.qzxx.com/pogoplug#官方兼容源 默认使用at91兼容源软件src/gz barrier_breaker http://downloads.openwrt.org/snapshots/trunk/at91/packagesdest root /dest ram /tmplists_dir ext /va...

阅读全文>>

pogo 默认百兆 上千兆 解决

root@PogoPlug:/# [  740.005347] libphy: stmmac-0:00 - Link is Up - 100/Full[  740.010611] br-lan: port 1(eth0) entered forwarding state[  740.016087] br-lan: port 1(eth0) entered forwarding state[  742.015255] br-lan: port 1(eth0) entered forwarding stateroot@...

阅读全文>>

pogo 官方兼容源代码

cat /etc/opkg.conf src/gz barrier_breaker http://downloads.openwrt.org/snapshots/trunk/at91/packagesdest root /dest ram /tmplists_dir ext /var/opkg-listsoption overlay_root /overlayarch all 100arch at91 300arch oxnas 900

阅读全文>>