# 

# ESW: Link Status Changed - Port1 Link Down

# 

#   

# 

# 

# 

# 

# 

# 

# 

# iwconfig

lo        no wireless extensions.

eth2      no wireless extensions.

ra0       RTWIFI SoftAP  ESSID:"MT7620_AP"  

          Mode:Managed  Channel=1  Access Point: 00:0C:43:76:20:68   

          Bit Rate=300 Mb/s   

eth2.1    no wireless extensions.

eth2.2    no wireless extensions.

br0       no wireless extensions.

# cd

# cd

# 

# 

# 

# 

# 

# 

# cat /proc/cpuinfo

system type             : MT7620

processor               : 0

cpu model               : MIPS 24Kc V5.0

BogoMIPS                : 385.02

wait instruction        : yes

microsecond timers      : yes

tlb_entries             : 32

extra interrupt vector  : yes

hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ff8, 0x0ff8, 0x0ccb, 0x0ff8]

ASEs implemented        : mips16 dsp

shadow register sets    : 1

core                    : 0

VCED exceptions         : not available

VCEI exceptions         : not available

# internet.sh

Password for 'admin' changed

br0: port 1(ra0) entering forwarding state

##### disable 1st wireless interface #####

##### disable 2nd wireless interface #####

rmmod: rt2860v2_ap_net: No sRtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!

ucdevice ra0 left promiscuous mode

h br0: port 1(ra0) entering disabled state

file or directory

rmmod: rt2860v2_ap_util: No such file or directory

rmmod: rt2860v2_sta_net: No such file or directory

rmmod: rt2860v2_sta: No such file or directory

rmmod: rt2860v2_sta_util: No such file or directory

insmod: rt2860v2_ap_util.ko: module not found

=== pAd = c089b000, size = 476104 ===

<-- RTMPAllocTxRxRingMemory, Status=0

<-- RTMPAllocAdapterBlock, Status=0

AP Driver version-2.7.1.6

insmod: rt2860v2_ap_net.ko: module not found

RX DESC a2e1e000  size = 2048

RTMP_TimerListAdd: add timer obj c08e00f8!

RTMP_TimerListAdd: add timer obj c08b6c64!

RTMP_TimerListAdd: add timer obj c08b6d80!

RTMP_TimerListAdd: add timer obj c08b6c90!

RTMP_TimerListAdd: add timer obj c08ae824!

RTMP_TimerListAdd: add timer obj c08a04b8!

RTMP_TimerListAdd: add timer obj c08ae538!

APSDCapable[0]=0

APSDCapable[1]=0

APSDCapable[2]=0

APSDCapable[3]=0

APSDCapable[4]=0

APSDCapable[5]=0

APSDCapable[6]=0

APSDCapable[7]=0

APSDCapable[8]=0

APSDCapable[9]=0

APSDCapable[10]=0

APSDCapable[11]=0

APSDCapable[12]=0

APSDCapable[13]=0

APSDCapable[14]=0

APSDCapable[15]=0

Key1Str is Invalid key length(0) or Type(0)

Key2Str is Invalid key length(0) or Type(0)

Key3Str is Invalid key length(0) or Type(0)

Key4Str is Invalid key length(0) or Type(0)

1. Phy Mode = 9

2. Phy Mode = 9

E2PROM: D0 target power=0xff20 

E2PROM: 40 MW Power Delta= 0 

3. Phy Mode = 9

AntCfgInit: primary/secondary ant 0/1

Initialize RF Central Registers for E2 !!!

Initialize RF Central Registers for E3 !!!

Initialize RF Channel Registers for E2 !!!

Initialize RF Channel Registers for E3 !!!

Initialize RF DCCal Registers for E2 !!!

Initialize RF DCCal Registers for E3 !!!

D1 = 0, D2 = 5, CalCode = 12 !!!

RT6352_Temperature_Init : BBPR49 = 0x0

RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff6

Current Temperature from BBP_R49=0xfffffffa

 TX BW Filter Calibration !!!

 RX BW Filter Calibration !!!

LOFT Calibration Done!

IQCalibration Start!

IQCalibration Done! CH = 0, (gain= 0, phase=3f)

IQCalibration Start!

IQCalibration Done! CH = 1, (gain= f, phase=3d)

TX IQ Calibration Done!

MCS Set = ff ff 00 00 01

Main bssid = 00:0c:43:76:20:68

<==== rt28xx_init, Status=0

0x1300 = 00064380

br0: port 2(eth2.1) entering forwarding state

device eth2.1 left promiscuous mode

device eth2 left promiscuous mode

br0: port 2(eth2.1) entering disabled state

/sbin/internet.sh: line 630: iptables: not found

/sbin/internet.sh: line 631: iptables: not found

/sbin/internet.sh: line 632: iptables: not found

rmmod: 8021q: No such file or directory

##### config Ralink ESW vlan partition (LLLLW) #####

switch reg write offset=2004, value=ff0003

switch reg write offset=2104, value=ff0003

switch reg write offset=2204, value=ff0003

switch reg write offset=2304, value=ff0003

switch reg write offset=2404, value=ff0003

switch reg write offset=2504, value=ff0003

switch reg write offset=2010, value=810000c0

switch reg write offset=2110, value=810000c0

switch reg write offset=2210, value=810000c0

switch reg write offset=2310, value=810000c0

switch reg write offset=2410, value=810000c0

switch reg write offset=2510, value=810000c0

switch reg write offset=2610, value=81000000

switch reg write offset=2710, value=81000000

switch reg write offset=2604, value=20ff0003

switch reg write offset=2704, value=20ff0003

Special Tag Disabled

switch reg write offset=2610, value=81000000

switch reg write offset=2014, value=10001

switch reg write offset=2114, value=10001

switch reg write offset=2214, value=10001

switch reg write offset=2314, value=10001

switch reg write offset=2414, value=10002

switch reg write offset=2514, value=10001

REG_ESW_WT_MAC_ATC is 0x7ff0002

done.

udhcpc: bind: No such device

device ra0 entered promiscuous mode

device eth2.1 entered promiscuous mode

device eth2 entered promiscuous mode

brctl: iface rai0: No such device

##### enable 2nd wireless interface #####

udhcpc (v1.12.1) started

br0: port 2(eth2.1) entering learning state

br0: port 2(eth2.1) entering learning state

br0: port 1(ra0) entering learning state

br0: port 1(ra0) entering learning state

ifconfig: ioctl 0x8914 failed: Cannot assign requested address

ifconfig: ioctl 0x8914 failed: Cannot assign requested address

br0: port 2(eth2.1) entering forwarding state

br0: port 1(ra0) entering forwarding state

killall: udhcpd: no process killed

Set: phy[0].reg[0] = 3b00

Set: phy[1].reg[0] = 3900

Set: phy[2].reg[0] = 3b00

Set: phy[3].reg[0] = 3b00

Set: phy[0].reg[0] = 3300

Set: phy[1].reg[0] = 3300

Set: phy[2].reg[0] = 3300

Set: phy[3].reg[0] = 3300

/sbin/nat.sh: line 47: iptables: not found

/sbin/internet.sh: line 996: radvd.sh: not found

#      

# 

# 

# internet.sh

Password for 'admin' changed

br0: port 1(ra0) entering forwarding state

##### disable 1st wireless interface #####

##### disable 2nd wireless interface #####

rmmod: rt2860v2_ap_net: No sRtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!

ucdevice ra0 left promiscuous mode

h br0: port 1(ra0) entering disabled state

file or directory

rmmod: rt2860v2_ap_util: No such file or directory

rmmod: rt2860v2_sta_net: No such file or directory

rmmod: rt2860v2_sta: No such file or directory

rmmod: rt2860v2_sta_util: No such file or directory

insmod: rt2860v2_ap_util.ko: module not found

=== pAd = c0c9e000, size = 476104 ===

<-- RTMPAllocTxRxRingMemory, Status=0

<-- RTMPAllocAdapterBlock, Status=0

AP Driver version-2.7.1.6

insmod: rt2860v2_ap_net.ko: module not found

RX DESC a28d4000  size = 2048

RTMP_TimerListAdd: add timer obj c0ce30f8!

RTMP_TimerListAdd: add timer obj c0cb9c64!

RTMP_TimerListAdd: add timer obj c0cb9d80!

RTMP_TimerListAdd: add timer obj c0cb9c90!

RTMP_TimerListAdd: add timer obj c0cb1824!

RTMP_TimerListAdd: add timer obj c0ca34b8!

RTMP_TimerListAdd: add timer obj c0cb1538!

APSDCapable[0]=0

APSDCapable[1]=0

APSDCapable[2]=0

APSDCapable[3]=0

APSDCapable[4]=0

APSDCapable[5]=0

APSDCapable[6]=0

APSDCapable[7]=0

APSDCapable[8]=0

APSDCapable[9]=0

APSDCapable[10]=0

APSDCapable[11]=0

APSDCapable[12]=0

APSDCapable[13]=0

APSDCapable[14]=0

APSDCapable[15]=0

Key1Str is Invalid key length(0) or Type(0)

Key2Str is Invalid key length(0) or Type(0)

Key3Str is Invalid key length(0) or Type(0)

Key4Str is Invalid key length(0) or Type(0)

1. Phy Mode = 9

2. Phy Mode = 9

E2PROM: D0 target power=0xff20 

E2PROM: 40 MW Power Delta= 0 

3. Phy Mode = 9

AntCfgInit: primary/secondary ant 0/1

Initialize RF Central Registers for E2 !!!

Initialize RF Central Registers for E3 !!!

Initialize RF Channel Registers for E2 !!!

Initialize RF Channel Registers for E3 !!!

Initialize RF DCCal Registers for E2 !!!

Initialize RF DCCal Registers for E3 !!!

D1 = 0, D2 = 5, CalCode = 12 !!!

RT6352_Temperature_Init : BBPR49 = 0x0

RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff6

Current Temperature from BBP_R49=0xfffffffa

 TX BW Filter Calibration !!!

 RX BW Filter Calibration !!!

LOFT Calibration Done!

IQCalibration Start!

IQCalibration Done! CH = 0, (gain= 1, phase= 1)

IQCalibration Start!

IQCalibration Done! CH = 1, (gain= f, phase=3d)

TX IQ Calibration Done!

MCS Set = ff ff 00 00 01

Main bssid = 00:0c:43:76:20:68

<==== rt28xx_init, Status=0

0x1300 = 00064380

br0: port 2(eth2.1) entering forwarding state

device eth2.1 left promiscuous mode

device eth2 left promiscuous mode

br0: port 2(eth2.1) entering disabled state

/sbin/internet.sh: line 630: iptables: not found

/sbin/internet.sh: line 631: iptables: not found

/sbin/internet.sh: line 632: iptables: not found

rmmod: 8021q: No such file or directory

##### config Ralink ESW vlan partition (LLLLW) #####

switch reg write offset=2004, value=ff0003

switch reg write offset=2104, value=ff0003

switch reg write offset=2204, value=ff0003

switch reg write offset=2304, value=ff0003

switch reg write offset=2404, value=ff0003

switch reg write offset=2504, value=ff0003

switch reg write offset=2010, value=810000c0

switch reg write offset=2110, value=810000c0

switch reg write offset=2210, value=810000c0

switch reg write offset=2310, value=810000c0

switch reg write offset=2410, value=810000c0

switch reg write offset=2510, value=810000c0

switch reg write offset=2610, value=81000000

switch reg write offset=2710, value=81000000

switch reg write offset=2604, value=20ff0003

switch reg write offset=2704, value=20ff0003

Special Tag Disabled

switch reg write offset=2610, value=81000000

switch reg write offset=2014, value=10001

switch reg write offset=2114, value=10001

switch reg write offset=2214, value=10001

switch reg write offset=2314, value=10001

switch reg write offset=2414, value=10002

switch reg write offset=2514, value=10001

REG_ESW_WT_MAC_ATC is 0x7ff0002

done.

udhcpc: bind: No such device

device ra0 entered promiscuous mode

device eth2.1 entered promiscuous mode

device eth2 entered promiscuous mode

brctl: iface rai0: No such device

##### enable 2nd wireless interface #####

udhcpc (v1.12.1) started

br0: port 2(eth2.1) entering learning state

br0: port 2(eth2.1) entering learning state

br0: port 1(ra0) entering learning state

br0: port 1(ra0) entering learning state

ifconfig: ioctl 0x8914 failed: Cannot assign requested address

ifconfig: ioctl 0x8914 failed: Cannot assign requested address

br0: port 2(eth2.1) entering forwarding state

br0: port 1(ra0) entering forwarding state

killall: udhcpd: no process killed

Set: phy[0].reg[0] = 3b00

Set: phy[1].reg[0] = 3b00

Set: phy[2].reg[0] = 3b00

Set: phy[3].reg[0] = 3b00

Set: phy[0].reg[0] = 3300

Set: phy[1].reg[0] = 3300

Set: phy[2].reg[0] = 3300

Set: phy[3].reg[0] = 3300

/sbin/nat.sh: line 47: iptables: not found

/sbin/internet.sh: line 996: radvd.sh: not found

# 

# 

# lsmod

Module                  Size  Used by

rt2860v2_ap          1466256  1 

# ifconfig ra0 down

br0: port 1(ra0) entering forwarding state

# rmmod rt2860v2_ap

RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!

device ra0 left promiscuous mode

br0: port 1(ra0) entering disabled state

# insmod /lib/modules/2.6.36/

/lib/modules/2.6.36/kernel/          /lib/modules/2.6.36/modules.order

/lib/modules/2.6.36/modules.builtin

# insmod /lib/modules/2.6.36/

/lib/modules/2.6.36/kernel/          /lib/modules/2.6.36/modules.order

/lib/modules/2.6.36/modules.builtin

# insmod /lib/modules/2.6.36/kernel/

/lib/modules/2.6.36/kernel/crypto/   /lib/modules/2.6.36/kernel/drivers/

# insmod /lib/modules/2.6.36/kernel/

/lib/modules/2.6.36/kernel/crypto/   /lib/modules/2.6.36/kernel/drivers/

# insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_

/lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_ap/

/lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_sta/

# insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_sta/rt2860v2_s

ta.ko 

=== pAd = c1225000, size = 525016 ===

<-- RTMPAllocTxRxRingMemory, Status=0

<-- RTMPAllocAdapterBlock, Status=0

#   

insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_sta/rt2860v2_s

ta.ko 

rmmod rt2860v2_ap

ifconfig ra0 down

lsmod

kill -SIGHUP 4799

lsmod

ifconfig ra0 down

rmmod rt2860v2_ap

insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/rt2860v2_sta/rt2860v2_s
ta.ko 

ifconfig ra0 down

wpa_supplicant -B -Dralink -ira0 -c/tmp/wpa_supplicant.conf -P/tmp/wpa_supplicant.pid

ctrl_interface=/tmp/wpa_supplicant_ctrl
        ap_scan=1
        fast_reauth=1
network={ssid=
psk=
     
}